P010A
Mass or Volume Air Flow Sensor B Circuit
Sensor B is a second mass air flow sensor in a second intake path, found on engines with two air filter boxes – for example the Nissan VR30DDTT twin-turbo V6 (where sensor B belongs to bank 2) or GM's 3.0 litre twin-turbo V6. P010A is the general circuit fault of sensor B: no usable signal at all, just like P0100 for sensor A. Ford's 2020–2023 petrol summary lists it for a broken element of digital sensor B, with the same limit as sensor A (period above 1.3 ms for half a second); which engines carry sensor B is not stated. GM's twin-turbo V6 only uses the other sensor B codes. The engine can run on values calculated from manifold pressure, throttle and the remaining sensor.
Possible causes
- Connector or wiring of sensor B open high
- Sensor B faulty internally (broken element) high
- Supply of sensor B missing (fuse, relay) medium
- Control module input faulty low
Symptoms
- Check engine light on
- Lack of power, hesitation (substitute value)
- Rough idle
- Start-stop may be disabled
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P010A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.