OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00FE

EVAP System Tank Vapor Line Restricted/Blocked

The evaporative emission system stores fuel vapour from the tank in a charcoal canister and later purges it into the engine. P00FE means the vapour path between tank and canister is restricted or blocked. That matters because a blocked line can hide the tank side from the leak test and disturb tank venting and refuelling. Ford, where P00FE replaces its own code P144A, checks this once per drive cycle during the cruise leak test, while purging with the vent valve closed, and confirms suspicious pressure responses with an intrusive test. VW used the same code on the 2013–2019 Golf, where the diagnosis covers the purge valve and the leak detection module. Typical causes are kinked or pinched lines and charcoal grains from a broken canister.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / FE

Possible causes

  • Kinked, pinched or misrouted vapour line between tank and canister high
  • Charcoal canister broken down, grains blocking lines or valves medium
  • Rollover or fill-limit valve at the tank stuck closed (e.g. after overfilling) medium
  • Purge valve or leak detection module faulty low
  • Tank pressure sensor reading wrong low

Symptoms

  • Check engine light on
  • Fuel nozzle clicks off early when refuelling
  • Hiss or vacuum when opening the fuel cap
  • Usually no change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P00FE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication