OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00FC

Turbocharger Outlet Pressure Sensor A Intermittent/Erratic

The turbocharger outlet pressure sensor A measures the pressure directly after the compressor, usually ahead of the charge air cooler; FCA fits it as a combined temperature and pressure sensor. Boost control and compressor protection use the value. P00FC covers short dropouts or jumps in the signal that are each too brief for the low or high code, or changes faster than real pressure can move. Comparable intermittent monitors count range violations per drive cycle – Ford's MAP check, for example, sets after 25 events. The FCA case for the sibling code P00F9 was a sensor not fully seated with an unlatched connector, exactly the kind of fault that produces erratic signals; heat and vibration near the turbocharger add to it. GM and Ford do not use this code family in their published summaries – they rely on the boost sensor ahead of the throttle (P0235–P0238) – so no manufacturer document naming exactly this code was found.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / FC

Possible causes

  • Connector loose, not latched, or terminals corroded or spread high
  • Harness chafed or broken near the turbocharger (heat, vibration) medium
  • Sensor with internal dropouts medium
  • Engine control module faulty low

Symptoms

  • Check engine light on, possibly only after several drives
  • Occasional hesitation or brief loss of power under load
  • Fault comes and goes

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P00FC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication