P00F9
Turbocharger Outlet Pressure Sensor A Range/Performance
The turbocharger outlet pressure sensor A measures the pressure directly at the compressor outlet. It is a separate code family from the boost pressure sensor, which usually measures the pressure just ahead of the throttle; engines use it where the pressure behind the compressor is needed in addition, for example to judge the pressure loss across the charge air cooler or to protect against compressor surge. One manufacturer documents it as a combined temperature and pressure sensor. P00F9 means the signal is electrically valid but implausible. In a documented case the cause was a sensor not seated properly and a connector not fully engaged; securing them solved it without parts.
Possible causes
- Connector loose or not fully engaged, or sensor not seated properly high
- Sensor oil-coated from turbocharger oil mist or characteristic drifted medium
- Leak at the sensor flange or seal medium
- Engine control module faulty low
Symptoms
- Check engine light on
- Loss of power or limp mode with boost limitation
- Jerking under load possible
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00F9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.