P00F7
Barometric Pressure - Turbocharger/Supercharger Inlet Pressure Correlation Bank 2
This is the bank 2 counterpart of the comparison between barometric pressure and the pressure ahead of the turbocharger or supercharger. At low air flow the inlet pressure sensor reads close to ambient pressure, minus the small loss across the air filter, so it must match the barometric reading. The code is set when the difference is too large; a clogged air filter or a leaking intake hose on bank 2 can cause it as well as a drifting sensor. None of the published manufacturer documents searched uses this code; the explanation follows regulations and comparable manufacturer monitors.
Possible causes
- Inlet pressure sensor of bank 2 drifting or dirty high
- Air filter or intake of bank 2 clogged medium
- Intake hose between air flow meter and turbocharger leaking or slipped off medium
- Barometric sensor faulty low
Symptoms
- Check engine light on
- Reduced power or boost limitation possible
- Whistling from an intake leak
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00F7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.