OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00F5

Humidity Sensor Circuit High

The humidity sensor measures the relative humidity of the intake air; on documented vehicles it is built into the mass air flow sensor or a combined sensor. The engine control module uses the value, for example, to correct torque and in emission models. One documented design is capacitive and reports humidity as a pulsed signal with a duty cycle that the control module converts back. P00F5 means the signal is above its valid range (for example a duty cycle near 100 percent), typically from a sensor fault or a short to battery voltage.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / F5

Possible causes

  • Sensor or combined air flow sensor faulty high
  • Signal wire shorted to battery voltage medium
  • Engine control module faulty low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms
  • Slightly uneven torque or higher consumption possible

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P00F5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication