P00F4
Humidity Sensor Circuit Low
The humidity sensor measures the relative humidity of the intake air; on documented vehicles it is built into the mass air flow sensor or a combined sensor. The engine control module uses the value, for example, to correct torque and in emission models. One documented design is capacitive and reports humidity as a pulsed signal with a duty cycle that the control module converts back. P00F4 means the signal is below its valid range (for example a duty cycle near zero), typically because the signal wire is shorted to ground or the sensor supply is missing.
Possible causes
- Signal wire shorted to ground high
- Sensor or combined air flow sensor faulty medium
- Sensor supply missing medium
Symptoms
- Check engine light on
- Usually no noticeable symptoms
- Slightly uneven torque or higher consumption possible
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00F4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.