OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00F1

Intake Air Temperature Sensor 3 Circuit Intermittent/Erratic Bank 2

Intake air temperature sensor 3 is a third air temperature sensor in the intake path. On documented turbocharged engines with a humidity sensor it is the manifold temperature sensor behind the charge air cooler, an NTC thermistor read directly by the engine control module and used for cylinder filling and ignition timing. The numbering of intake air temperature sensors differs between manufacturers. P00F1: The signal jumps faster than a real temperature can change, which typically points to a loose contact. No manufacturer description naming this exact code was found; bank 2 codes are intended for engines with two separate intake paths.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / F1

Possible causes

  • Loose contact or wire broken by engine movement high
  • Moisture in the connector medium
  • Interference or control module fault low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms; substitute value used
  • Slightly reduced power through knock protection possible

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P00F1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication