Powertrain
generic / SAE
P00EB
Intake Air Temperature Sensor 3 Circuit High Bank 1
IAT sensor 3 bank 1 signal voltage above expected range. The intake air temperature sensor feeds the ECM's density calculation — a drifted reading miscalculates fuel mass and pushes mixture lean (cold reading) or rich (hot reading).
SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / EB
Possible causes
- Signal wire open high
- Connector pins corroded - high contact resistance low
- Supply wire pinched against B+ source low
Inspection / repair
- Difficulty: easy
- DIY: possible
- Estimated cost: 40–250 €
- Estimated time: 0.3–1.5 h
- Component: iat sensor 3
- Component: sensor wiring
- MIL / check engine light
- emissions-relevant
Sources
References
sae:J2012