P00E9
Intake Air Temperature Sensor 3 Circuit Range/Performance Bank 1
Intake air temperature sensor 3 is a third air temperature sensor in the intake path. On documented turbocharged engines with a humidity sensor it is the manifold temperature sensor behind the charge air cooler, an NTC thermistor read directly by the engine control module and used for cylinder filling and ignition timing. The numbering of intake air temperature sensors differs between manufacturers. P00E9: This is a plausibility check once per ignition cycle after a long standstill (eight hours in a documented case): if the other intake temperature sensors agree and this sensor deviates, or no two agree and this one deviates most, the code is set.
Possible causes
- Sensor drifting or stuck high
- Contact resistance at the connector medium
- A reference sensor reading wrong medium
- Sensor mounted wrongly or exposed to external heat low
Symptoms
- Check engine light on
- Usually no noticeable symptoms; substitute value used
- Slightly reduced power through knock protection possible
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00E9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.