P00E6
Intake Air Pressure Measurement System - Multiple Sensor Correlation Bank 2
This is the bank 2 counterpart of the multiple pressure sensor check for engines with separate pressure measurement per bank, such as twin-turbo V engines. With the engine stopped, all intake pressure sensors should read ambient pressure. If one stands out, it gets its own code; this code is set when the readings disagree but no single sensor can be identified, which points to a fault affecting several sensors such as a shared reference voltage or ground. None of the published manufacturer documents searched uses this code; the explanation follows regulations and comparable manufacturer monitors.
Possible causes
- A pressure sensor on bank 2 drifting high
- Shared 5 V reference or ground faulty medium
- Sensor port blocked or hose leaking medium
- Barometric sensor drifting low
Symptoms
- Check engine light on
- Boost limitation or uneven power possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P00E6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.