P00DB
Ambient Air Temperature Sensor Circuit B Low
Ambient air temperature sensor B is a second, separate ambient temperature circuit in addition to sensor A. What the second measuring point is used for in a given vehicle could not be documented; the value may be wired directly to the control module or come over the data bus. Regulations require monitoring of such inputs because ambient temperature is often an enabling condition for other diagnostics. None of the manufacturer documents searched uses these codes; the explanation follows sensor A. P00DB: The signal is below its valid range. Which fault gives a low or high signal depends on the sensor wiring: with the usual NTC pull-up circuit a low signal means a short to ground and an extremely high reading, a high signal an open circuit and an extremely low reading, but at least one manufacturer documents the opposite assignment.
Possible causes
- Sensor faulty (exposed to spray and stone chips) high
- Connector corroded or wiring damaged, often after front-end work high
- Module supplying the value over the data bus faulty medium
- Control module faulty low
Symptoms
- Wrong or missing outside temperature display
- Climate control regulates incorrectly
- Check engine light on (manufacturer-dependent)
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00DB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.