P00CF
Barometric Pressure - Turbocharger/Supercharger Boost Sensor A Correlation
With the engine stopped or without boost, the boost pressure sensor A (between compressor and throttle) must read practically ambient pressure. This code is set when it deviates from the barometric pressure sensor by more than a threshold; the code does not say which of the two is wrong. Manufacturers that publish their diagnostics run the same comparison under other codes. None of the published manufacturer documents searched uses this code; the explanation follows regulations and comparable manufacturer monitors.
Possible causes
- Boost pressure sensor dirty, oil-coated or drifting high
- Barometric sensor drifting, also when inside the control module medium
- Contact resistance at connector, ground or 5 V reference medium
- Sensor port or hose leaking or blocked medium
Symptoms
- Check engine light on
- Reduced boost or limp mode possible
- Often no further symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00CF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.