P00CB
Fuel Volume Regulator Solenoid Supply Voltage Control Circuit/Open
The fuel volume regulator is the solenoid valve that meters how much fuel the high-pressure pump delivers (metering unit on diesels, pump control valve on some gasoline direct-injection engines). Many control modules switch such solenoids on both sides; P0001 to P0004 cover the control side, while these codes cover the supply side (high-side driver). P00CB reports an open circuit on the supply side. Rail pressure may then deviate, with reduced power or hard starting. None of the published manufacturer documents searched uses this code; the explanation follows regulations and comparable manufacturer monitors.
Possible causes
- Supply wire broken or connector corroded high
- Regulator coil open or shorted (often built into the pump) medium
- High-side driver in the engine control module faulty low
Symptoms
- Check engine light on
- Loss of power or limp mode
- Hard starting or jerking
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P00CB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.