P00C7
Intake Air Pressure Measurement System - Multiple Sensor Correlation Bank 1
With the engine stopped, all pressure sensors in the intake system (manifold pressure, boost pressure, barometric pressure) should read ambient pressure; some diesels also compare them at idle. The control module compares them: if one sensor stands out, it sets that sensor's own code. P00C7 is set when the readings disagree but no single sensor can be identified as faulty, which points to a fault affecting several sensors, such as a shared reference voltage or ground.
Possible causes
- Shared 5 V reference or ground of the pressure sensors disturbed high
- Two sensors drifting at the same time (contamination, oil mist, ageing) medium
- Pressure hose to a sensor leaking or blocked medium
- Engine control module or software low
Symptoms
- Check engine light on
- Often no further symptoms
- Substitute values with loss of power possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P00C7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.