P00C6
Fuel Rail Pressure Too Low - Engine Cranking
Direct-injection engines release injection only once the rail has reached a minimum pressure. P00C6 is set when this pressure is not reached quickly enough while cranking, or, in another documented variant, when it drops below the minimum again right after the high-pressure start. Cranking then takes longer or the engine does not start. The check runs once per start; some manufacturers only enable it above a minimum tank level.
Possible causes
- High-pressure pump weak, or its drive cam or follower worn high
- Lift pump or low-pressure supply too weak medium
- Control valve on the pump faulty medium
- Leak or check valve fault letting pressure bleed off after shutdown medium
- Very low fuel level low
Symptoms
- Check engine light on
- Long cranking
- No start
- Jerking after starting
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P00C6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.