P00C5
Turbocharger/Supercharger B Turbine Overspeed
The control module has detected that turbocharger B runs above its permitted maximum speed. Speed is measured by a dedicated sensor per turbocharger where fitted, or estimated from a model of pressure ratio and air mass. Turbocharger B is the second turbocharger in series systems or the one on bank 2 in parallel systems. Typical causes are sticking boost control of this turbocharger or a charge-air leak; find the cause before driving on, as overspeed can destroy the turbocharger. No manufacturer description naming this exact code was found; the explanation follows its documented counterpart.
Possible causes
- Boost control of turbocharger B sticking (wastegate or vanes) high
- Leak on the pressure side making the turbocharger work harder medium
- Speed sensor or its wiring delivering wrong values medium
- Operation at high altitude or software low
Symptoms
- Check engine light on
- Limp mode with reduced power
- Whistling from the turbocharger
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P00C5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.