P00BE
Mass or Volume Air Flow B Circuit Range/Performance - Air Flow Too Low
The control module compares the air mass measured by the air flow meter with the air mass it expects from a model, for example from manifold pressure, boost pressure and throttle position. These codes report the deviation with its direction: "too low" means the meter measures less air than expected, "too high" more. Regulations allow manufacturers to use one code for both directions or separate codes, as here. P00BE concerns air flow meter B, i.e. a second meter, for example in the second intake path of a V engine. Typical causes are air entering behind the meter, a charge-air leak, a dirty meter or a restricted intake. No manufacturer description naming this exact code was found; the explanation follows its documented counterpart.
Possible causes
- Air leak behind the meter or charge-air leak high
- Air flow meter dirty medium
- Air filter or intake restricted medium
- Wiring or connector faulty low
Symptoms
- Check engine light on
- Loss of power
- Lean mixture codes possible
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00BE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.