OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00BB

Fuel Injector Insufficient Flow - Forced Limited Power

One or more injectors deliver less fuel than commanded — ECU has activated forced power reduction. A flow-deviating injector throws off cylinder balance — adjacent cylinders run leaner/richer to compensate, often masking the root cause until the trim limit is hit.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / BB

Possible causes

  • Injector nozzle clogged or worn high

Symptoms

  • Check engine light on
  • Misfire or rough idle on the affected cylinder
  • Increased fuel consumption
  • Possible fuel smell or smoke from exhaust

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended
  • Estimated cost: 200–2500 €
  • Estimated time: 1.5–8 h
  • Component: fuel injectors
  • MIL / check engine light
  • emissions-relevant
  • drive cycle required
  • limp mode possible

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication