OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00B8

MAP - Mass or Volume Air Flow Correlation Bank 2

On engines with two intake paths, the control module compares the manifold pressure of bank 2 with the measured or calculated air quantity of that bank. P00B8 is set when the two do not fit together; the code does not say which value is wrong. As with its bank 1 counterpart, typical causes are an air leak, an exhaust gas recirculation valve that does not close, or a dirty or drifting sensor. Each sensor can be electrically fine on its own. No manufacturer description naming this exact code was found; the explanation follows its documented counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / B8

Possible causes

  • Air leak in the intake of bank 2 high
  • EGR valve dirty or sticking open medium
  • Manifold pressure sensor or air flow meter dirty or drifting medium
  • Wiring or connector faulty low

Symptoms

  • Check engine light on
  • Rough running
  • Mixture codes possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P00B8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication