P00AB
Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 2
Intake air temperature sensor 1 for bank 2 measures the intake air temperature in the second intake path, typically near the air filter or in the air flow meter of that bank, on engines with two separate intake paths. For P00AB, this is a plausibility check: at a start after a long standstill the sensor is compared with other temperature sensors (for example coolant temperature or the matching sensor of the other bank), which should then agree. Bank 2 codes occur only on engines with two separate intake or charge-air paths, one per cylinder bank.
Possible causes
- Sensor drifting or coated with oil or soot high
- Contact resistance at the connector medium
- Comparison sensor faulty medium
- Engine block heater or auxiliary heater distorting the start comparison low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
- Emissions test or readiness check may fail
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.