P00A4
Charge Air Cooler Temperature Sensor Circuit Intermittent/Erratic Bank 2
The charge air cooler temperature sensor for bank 2 (an NTC thermistor) measures the charge air temperature in the second charge-air path, for example on V engines with two charge air coolers. The engine control module uses it for the air mass calculation, boost control and component protection. For P00A4, the signal jumps faster than a real temperature can change, which typically points to a loose contact. No manufacturer description naming this exact code was found. Bank 2 codes occur only on engines with two separate intake or charge-air paths, one per cylinder bank.
Possible causes
- Loose contact or wire broken by movement high
- Sensor failing intermittently medium
- Interference on the signal wire low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
- Emissions test or readiness check may fail
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P00A4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.