OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P00A0

Charge Air Cooler Temperature Sensor Circuit Bank 2

The charge air cooler temperature sensor for bank 2 (an NTC thermistor) measures the charge air temperature in the second charge-air path, for example on V engines with two charge air coolers. The engine control module uses it for the air mass calculation, boost control and component protection. For P00A0, this is the general circuit fault; low and high signals have their own codes. No manufacturer description naming this exact code was found. Bank 2 codes occur only on engines with two separate intake or charge-air paths, one per cylinder bank.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / A0

Possible causes

  • Connector or wiring faulty high
  • Sensor faulty high
  • Supply or ground disturbed medium
  • Engine control module faulty low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms
  • Emissions test or readiness check may fail

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P00A0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication