P009F
Fuel Pressure Relief Control Stuck On
The fuel pressure relief control is an electrically controlled valve on the fuel rail that the engine control module opens to reduce rail pressure deliberately, for example on overrun, on load drops or when the engine is switched off. It differs from the purely mechanical pressure relief valve, which opens passively at overpressure, and from the pressure regulator, which controls pressure continuously. Manufacturer documents show this code mainly on heavy-duty diesel engines. P009F means the valve stays open or leaks internally: rail pressure collapses or cannot be built up. Manufacturer bulletins name internal leakage of this valve as a known fault; low rail pressure codes often appear at the same time.
Possible causes
- Valve leaking internally or stuck open high
- Fuel contamination medium
- Short circuit keeping the valve energised low
Symptoms
- Check engine light on
- Hard starting
- Reduced power
- Low rail pressure codes
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P009F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.