P009C
Fuel Pressure Relief Control Circuit Low
The fuel pressure relief control is an electrically controlled valve on the fuel rail that the engine control module opens to reduce rail pressure deliberately, for example on overrun, on load drops or when the engine is switched off. It differs from the purely mechanical pressure relief valve, which opens passively at overpressure, and from the pressure regulator, which controls pressure continuously. Manufacturer documents show this code mainly on heavy-duty diesel engines. P009C reports too low a voltage in the control circuit, typically a short to ground. Rail pressure can then not be reduced as intended, and the engine may be derated.
Possible causes
- Wiring chafed with short to ground, or connector corroded high
- Valve coil faulty medium
- Output driver in the engine control module faulty low
Symptoms
- Check engine light on
- Reduced power (derate) possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P009C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.