P009A
Intake Air Temperature/Ambient Air Temperature Correlation
After a long standstill with the engine cold, intake air temperature and ambient air temperature should be about the same. P009A is set when the two sensors disagree by more than a threshold at the next start. A detected engine block heater usually suspends the test. Several manufacturers perform this comparison under other codes; no manufacturer description naming P009A itself was found. Suspects are both sensors, an ambient sensor in a heat-affected position and contact resistance at a connector.
Possible causes
- Intake air temperature sensor drifting or contaminated high
- Ambient temperature sensor faulty or in a heat-affected position medium
- Contact resistance at a connector medium
- Engine block heater or auxiliary heater distorting the comparison low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P009A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.