OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0096

Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1

Intake air temperature sensor 2 is the second air temperature sensor in the intake path. On many turbocharged engines it sits in the intake manifold behind the compressor and charge air cooler, often combined with the manifold pressure sensor, and is used to calculate cylinder filling and ignition timing. The numbering is not standardised, so its position can differ between manufacturers. P0096 is a plausibility check: at a start after a long standstill the sensor is compared with intake air temperature sensor 1 and others, which should then agree; some systems also flag implausibly high readings while driving. A sensor stuck at one value is detected this way.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 96

Possible causes

  • Sensor drifting or coated with oil or soot from crankcase and exhaust gas recirculation high
  • Contact resistance at the connector medium
  • Comparison sensor faulty medium
  • Heat soak or leak in the intake manifold low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms
  • Slightly changed power or retarded ignition possible

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0096

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication