OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0093

Fuel System Leak Detected - Large Leak

A leak in the high-pressure fuel system is not measured directly but inferred from a pressure and volume balance. P0093 means the pump is already delivering at its limit and rail pressure still stays well below target. The leak can be external (line, rail) or internal (injector return, relief valve). An external leak is a fire hazard: stop the engine and inspect it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 93

Possible causes

  • High-pressure line or rail fitting leaking high
  • Injector with excessive leak-off high
  • Pressure relief or control valve leaking medium
  • Weak pump or low-pressure supply mistaken for a leak medium

Symptoms

  • Check engine light on
  • Loss of power or reduced power mode
  • Long cranking
  • Fuel smell or visible leak

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0093

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 5 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication