OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0091

Fuel Pressure Regulator A Control Circuit Low

On common-rail diesel and gasoline direct-injection engines, a high-pressure pump feeds the fuel rail, a sensor measures rail pressure, and the engine control module regulates it towards a target from its maps. The fuel pressure regulator A is the actuator the manufacturer designates for this: depending on the system a pressure control valve that releases fuel from the rail, or the control valve on the high-pressure pump. Some manufacturers report the pump valve under the "fuel volume regulator" codes instead. P0091 means the voltage in the control circuit is too low, typically a short to ground. Rail pressure can then no longer be controlled as intended, and the engine usually runs in reduced power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 91

Possible causes

  • Control wire shorted to ground, or connector corroded high
  • Regulator coil faulty high
  • Fuse or supply voltage faulty medium
  • Output driver in the engine control module faulty low

Symptoms

  • Check engine light on
  • Reduced power mode
  • Hard starting or stalling

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0091

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication