OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P008D

Fuel Cooler Pump Control Circuit Low

On some common-rail diesels, fuel returning from the injection system is cooled in a heat exchanger connected to a low-temperature coolant circuit. An electric coolant pump, switched by the engine control module depending on fuel temperature, drives this circuit. P008D reports too low a voltage, typically a short to ground of this pump or its relay. If the pump fails for long, the fuel runs hotter; some systems then limit power to protect components.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 8D

Possible causes

  • Connector or wiring faulty high
  • Fuel cooler pump faulty high
  • Relay or fuse faulty medium
  • Output driver in the engine control module faulty low

Symptoms

  • Check engine light on
  • Often no further symptoms
  • Reduced power when fuel gets hot possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P008D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication