P008C
Fuel Cooler Pump Control Circuit/Open
On some common-rail diesels, fuel returning from the injection system is cooled in a heat exchanger connected to a low-temperature coolant circuit. An electric coolant pump, switched by the engine control module depending on fuel temperature, drives this circuit. P008C reports an open control circuit of this pump or its relay. If the pump fails for long, the fuel runs hotter; some systems then limit power to protect components.
Possible causes
- Connector or wiring faulty high
- Fuel cooler pump faulty high
- Relay or fuse faulty medium
- Output driver in the engine control module faulty low
Symptoms
- Check engine light on
- Often no further symptoms
- Reduced power when fuel gets hot possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P008C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.