OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P008A

Low Pressure Fuel System Pressure - Too Low

Some engines, mainly gasoline direct injection with a demand-controlled in-tank pump, have their own pressure sensor in the low-pressure line between the tank pump and the high-pressure pump. The engine control module compares this supply pressure with its target. P008A is set when the supply pressure stays too low. Besides a weak tank pump or its control unit, a clogged filter or a faulty sensor, simply running the tank empty can set this code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 8A

Possible causes

  • Tank run empty or very low fuel level high
  • In-tank pump or its control unit faulty high
  • Filter or line restricted medium
  • Low-pressure sensor faulty medium

Symptoms

  • Check engine light on
  • Hard starting
  • Jerking under load
  • High-pressure codes may follow

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P008A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication