P007D
Charge Air Cooler Temperature Sensor Circuit High Bank 1
The charge air cooler temperature sensor (an NTC thermistor) measures the temperature of the compressed charge air at the charge air cooler, depending on the manufacturer upstream or downstream of it, and is often combined with the boost pressure sensor. The engine control module uses it for the air mass calculation, boost control, component protection and to monitor cooler efficiency. P007D: A high signal means an open circuit or a short to the reference voltage; with an NTC sensor the control module then reads an extremely low temperature.
Possible causes
- Wire broken or connector unplugged high
- Sensor open internally high
- Signal wire shorted to the reference or battery voltage medium
- Engine control module faulty low
Symptoms
- Check engine light on
- Reduced power possible, especially on diesels
- Often no noticeable symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P007D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.