P007C
Charge Air Cooler Temperature Sensor Circuit Low Bank 1
The charge air cooler temperature sensor (an NTC thermistor) measures the temperature of the compressed charge air at the charge air cooler, depending on the manufacturer upstream or downstream of it, and is often combined with the boost pressure sensor. The engine control module uses it for the air mass calculation, boost control, component protection and to monitor cooler efficiency. P007C: A low signal means low sensor resistance, typically a short to ground; with an NTC sensor the control module then reads an extremely high temperature. Depending on the input circuit of the control module, an open circuit can occasionally also appear as low.
Possible causes
- Signal wire shorted to ground high
- Sensor shorted internally high
- Oil or moisture in the connector medium
- Engine control module faulty low
Symptoms
- Check engine light on
- Reduced power possible, especially on diesels
- Often no noticeable symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P007C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.