P007B
Charge Air Cooler Temperature Sensor Circuit Range/Performance Bank 1
The charge air cooler temperature sensor (an NTC thermistor) measures the temperature of the compressed charge air at the charge air cooler, depending on the manufacturer upstream or downstream of it, and is often combined with the boost pressure sensor. The engine control module uses it for the air mass calculation, boost control, component protection and to monitor cooler efficiency. P007B is a plausibility check: at a start after a long standstill the sensor is compared with other temperature sensors such as intake air or coolant, which should then agree. Some systems also check while driving whether the reading stays implausibly high.
Possible causes
- Sensor drifting or oil-coated and slow to respond high
- Wrong sensor fitted medium
- Comparison sensor faulty medium
- Charge air cooler efficiency or airflow impaired low
Symptoms
- Check engine light on
- Reduced power possible, especially on diesels
- Often no noticeable symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P007B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.