OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0072

Ambient Air Temperature Sensor Circuit A Low

The ambient air temperature sensor A is an NTC thermistor whose resistance falls as temperature rises. Its value is used by the climate control, the outside temperature display and the engine control module, which needs it to enable other diagnostics and to correct its maps. Depending on the vehicle the engine control module reads the sensor directly, or the instrument cluster or another module sends the value over the data bus; some vehicles have no sensor and estimate ambient temperature from intake air temperature. P0072: A low signal means low sensor resistance, typically a short to ground; with an NTC sensor the control module then reads an extremely high temperature.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 72

Possible causes

  • Signal wire shorted to ground high
  • Sensor shorted internally high
  • Instrument cluster or data transmission faulty (vehicles with bus-supplied value) medium
  • Engine control module faulty low

Symptoms

  • Outside temperature display shows implausibly high values
  • Climate control regulates incorrectly
  • Check engine light on (manufacturer-dependent)
  • Other monitors may not complete

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0072

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication