OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0071

Ambient Air Temperature Sensor Circuit A Range/Performance

The ambient air temperature sensor A is an NTC thermistor whose resistance falls as temperature rises. Its value is used by the climate control, the outside temperature display and the engine control module, which needs it to enable other diagnostics and to correct its maps. Depending on the vehicle the engine control module reads the sensor directly, or the instrument cluster or another module sends the value over the data bus; some vehicles have no sensor and estimate ambient temperature from intake air temperature. P0071 is a plausibility check: after a long standstill (several hours) ambient, intake air and coolant temperatures should be close together. If the ambient reading deviates by more than a threshold at the next start, the code is set; an engine block heater or strong sunshine are excluded where the system can detect them.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 71

Possible causes

  • Sensor drifting high
  • Sensor mounted in a heat-affected spot, e.g. after a repair medium
  • Actually the comparison sensor (intake air or coolant) is faulty medium
  • Contact resistance at the connector medium

Symptoms

  • Wrong or missing outside temperature display
  • Climate control regulates incorrectly
  • Check engine light on (manufacturer-dependent)
  • Other monitors may not complete

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0071

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication