P006B
MAP - Exhaust Pressure Correlation
On engines with an exhaust pressure sensor, mostly turbocharged diesels, the control module checks whether manifold pressure and exhaust back pressure fit each other, for example with the engine stopped, when both should be at ambient pressure. P006B is set when they do not. No manufacturer description of this code was found; the explanation follows the general rule for plausibility checks of input sensors. Suspects are the exhaust pressure sensor or its sooted hose, and the manifold pressure sensor. Each sensor can be electrically fine on its own; regulations require such plausibility checks for input sensors with a code of their own.
Possible causes
- Exhaust pressure sensor faulty or its hose sooted or blocked medium
- Manifold pressure sensor faulty medium
- EGR or turbocharger fault distorting pressures low
Symptoms
- Check engine light on
- Often no further symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P006B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.