P0069
Manifold Absolute Pressure - Barometric Pressure Correlation
With the ignition on and the engine stopped, the intake manifold is at ambient pressure, so the manifold pressure sensor and the barometric pressure sensor (often inside the control module) must read almost the same. P0069 is set when they differ by more than a threshold. Some systems also compare the barometric reading with a value estimated from manifold pressure at wide-open throttle while driving. Altitude and weather shift both values equally and do not cause the code. Each sensor can be electrically fine on its own; regulations require such plausibility checks for input sensors with a code of their own.
Possible causes
- Manifold pressure sensor drifting high
- MAP sensor hose blocked, kinked or leaking high
- Barometric pressure sensor (often inside the control module) faulty medium
- 5 V reference or connector faulty medium
Symptoms
- Check engine light on
- Often no further symptoms
- Mixture or power deviations possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0069
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG06 Hybrid Diagnostics.pdf
- saabwisonline.com/9-5-9650/2011/2-engine/engine-management-and-fuel-system-4-cyl-diesel/fault-diagnosis-diagnostic-trouble-codes/dtc-p0069
- static.nhtsa.gov/odi/tsbs/2020/MC-10178748-9999.pdf