OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P005E

Turbocharger/Supercharger Boost Control B Supply Voltage Circuit Low

"Boost control B" is the electrically driven actuator the engine control module uses to set boost pressure: depending on the engine a pulse-width modulated solenoid or vacuum converter at the wastegate, the control valve of variable turbine vanes, or an electric actuator with position feedback. B is the second actuator, for example on the high-pressure turbocharger of a two-stage system or on the second turbocharger; it does not denote cylinder bank 2. This code concerns the supply voltage that the control module switches to the actuator (high side): it is too low, for example because of a short to ground or an open circuit. Without control the actuator usually falls back to its rest position, which on most engines means low boost; depending on the design too much boost is also possible.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 5E

Possible causes

  • Supply wire shorted to ground or interrupted high
  • Fuse or relay of the supply faulty medium
  • Internal short in the actuator medium
  • High-side driver in the engine control module faulty low

Symptoms

  • Check engine light on
  • Loss of power or reduced power mode
  • Weak acceleration, noticeable turbo lag
  • Overboost possible in rare cases

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P005E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication