OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P001B

A Camshaft Profile Actuator A Control Circuit Low Bank 1

A camshaft profile actuator switches the intake camshaft (camshaft A) on bank 1 between two or more fixed cam profiles with different valve lift and duration, for example by shifting a cam piece axially or by locking rocker arms or tappets with oil pressure. Unlike a camshaft phaser it does not shift the timing continuously. The second letter "A" in the title numbers the actuator on this camshaft. This code is set when the control circuit reads too low, typically because the control wire is shorted to ground. The engine usually stays on one profile, typically the base profile with low lift. Some manufacturers report these faults with their own codes instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 1B

Possible causes

  • Control wire chafed through and shorted to ground high
  • Connector corroded or contaminated with oil medium
  • Shorted turns in the actuator coil medium
  • Output driver in the engine control module faulty low

Symptoms

  • Check engine light on
  • Less power at high engine speed because the profile does not switch
  • Higher consumption or uneven part-load running, depending on the profile
  • Engine speed may be limited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P001B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication