P000A
A Camshaft Position Slow Response Bank 1
This monitor does not judge the end position of the intake camshaft on bank 1 but how fast it follows a change of the commanded angle. The code is set when the actual angle lags behind the target for too long during several adjustments. The adjustment speed depends directly on oil flow, so worn or wrong oil and a partly clogged screen are the usual causes. Drivability is often hardly affected; the fault is an early warning before the camshaft misses its target position altogether. Bank 1 is the cylinder bank that contains cylinder 1.
Possible causes
- Oil too thick or too thin, sludged, or oil level low high
- Screen at the oil control valve partly clogged high
- Oil control valve sluggish medium
- Cam phaser leaking internally or worn medium
- Generally weak oil pressure, e.g. worn oil pump or bearings low
Symptoms
- Check engine light on
- Slight hesitation when accelerating
- Often no noticeable symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P000A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.