P0007
Fuel Shutoff Valve A Control Circuit High
The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply. On diesel engines it is usually closed without current, so that the engine stops reliably when switched off. The engine control module energises it to let fuel flow and monitors its control circuit continuously. P0007 means the voltage in the control circuit stays too high, because the control module expects the line to be pulled to ground. Typical causes are a short to battery voltage or, with ground-side switching, an open circuit. The valve cannot be switched, which leads to starting problems or stalling.
Possible causes
- Control wire open or shorted to battery voltage high
- Valve coil open medium
- Connector fault at the valve medium
- Output driver in the engine control module faulty low
Symptoms
- Check engine light on
- Hard starting or no start
- Engine stalls
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0007
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.