P0006
Fuel Shutoff Valve A Control Circuit Low
The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply. On diesel engines it is usually closed without current, so that the engine stops reliably when switched off. The engine control module energises it to let fuel flow and monitors its control circuit continuously. P0006 means voltage or current in the control circuit is below the expected range, typically because of a short to ground; depending on the output stage an open circuit can also show up this way. The valve is then not energised correctly, which can prevent starting or make the engine stall.
Possible causes
- Short to ground in the harness high
- Shorted turns in the valve coil medium
- Corroded connector medium
- Output driver in the engine control module faulty low
Symptoms
- Check engine light on
- Hard starting or no start
- Engine stalls
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0006
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.