OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0005

Fuel Shutoff Valve A Control Circuit/Open

The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply. On diesel engines it is usually closed without current, so that the engine stops reliably when switched off. The engine control module energises it to let fuel flow and monitors its control circuit continuously. P0005 is set when this control circuit is open. A normally closed valve then cannot open, so the engine does not start or cuts out while driving. Which vehicles use this valve and code varies by manufacturer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number– / 05

Possible causes

  • Wire or connector interrupted or corroded high
  • Valve coil open medium
  • Fuse or relay in the valve supply faulty medium
  • Output driver in the engine control module faulty low

Symptoms

  • Engine cranks but does not start
  • Engine cuts out suddenly
  • Check engine light on

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0005

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication