C0960
Tire Pressure Monitoring Module Internal Fault
Public material does not show C0960 in use by any maker; it is missing from the public lists, indexes and bulletins. The title points to a self-test failure in the control unit that evaluates the tire sensors. Makers with their own codes for this: Honda's TPMS unit reports code 81 when its RAM, ROM, A/D converter, EEPROM or arithmetic unit fails the check, and Mitsubishi's 2022 BCM-based system lists C1700 control unit faults with several subcodes. Land Rover keeps the function in a separate TPM module. FMVSS 138 requires a malfunction telltale within 20 minutes of any fault that stops the system working, so the warning lamp is the visible sign. Wheel sensors are usually fine; the module is reprogrammed or replaced.
Possible causes
- Memory or processor fault inside the TPMS control unit high
- Corrupted or incomplete software after programming medium
- Low supply voltage or poor ground disturbing the self-test low
Symptoms
- TPMS malfunction lamp lit permanently
- No tire pressures shown at all
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0960
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.