OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0950

Tire Pressure Monitoring Sensor Front Left

No public source links C0950 to a carmaker. The same content, the left front tire sensor, is documented under other numbers: GM and Saab use C0750, whose 2011 Saab 9-5 subcodes split a weak cell (03), too few telegrams (29) and an internal defect (39); Mitsubishi's 2022 index carries C1731 for the front left sensor and C1741 when its data stay away. GM bulletin PIC5650M lists C0750 among the codes that radio interference from aftermarket devices can cause, so the environment belongs in the diagnosis. As a catch-all for the front left unit the code covers a sensor that falls silent, reports nonsense or is not learned. Air pressure itself is not the issue; the indicator shows a system fault and that wheel loses its value.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number9 / 50

Possible causes

  • Cell of the left front sensor exhausted high
  • Sensor broken during tire fitting or wheel swapped for one without sensor medium
  • New sensor ID not registered for the front left position medium
  • Radio interference from aftermarket devices (GM PIC5650M) low

Symptoms

  • TPMS lamp flashes, then stays on
  • No pressure value for the left front tire

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0950

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication