C0915
Active Roll Stabilisation Front Actuator Circuit
No list, bulletin or manual shows C0915 in use; the NHTSA index only matches unrelated BMW document numbers. The title names the front actuator of active roll control, which splits the anti-roll bar and twists its halves against each other to hold the body level in bends and to decouple them on rough roads. Schaeffler's 48 V design for the Audi SQ7 front axle drives this with a brushless motor and a three-stage planetary gearbox, up to about 30 degrees of twist and 850-1200 Nm; ZF quotes up to 1400 Nm. A circuit fault concerns motor or sensor wiring between actuator and control unit. Audi's Q7/Q8 family logs control unit faults as C129700 at addresses 00D4/00D5, while Land Rover's older hydraulic system used C1119 and needed bleeding.
Possible causes
- Damaged plug or harness at the front stabiliser actuator high
- Actuator motor or internal sensor failed medium
- Fault in the 48 V supply feeding the actuator low
Symptoms
- Suspension or roll stabilisation warning
- Noticeably more body lean in corners
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0915
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- schaeffler.com/remotemedien/media/_shared_media/08_media_library/01_publications/schaeffler_2/technicalpaper_1/download_1/ATZ_Mechatronic-Roll-Controll.pdf
- zf.com/products/en/cars/products_64236.html
- static.nhtsa.gov/odi/tsbs/2024/MC-10249215-0001.pdf
- static.nhtsa.gov/odi/tsbs/2013/MC-10206492-9999.pdf