OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0910

TPMS Receiver Circuit Malfunction

There is no public evidence that any carmaker assigns C0910. It describes a fault in the circuit of the radio receiver that collects the wheel sensor telegrams. Designs differ: GM and Saab route the sensors through the remote door lock receiver, which passes the decoded telegrams on to the BCM; Nissan-built cars lacking keyless entry use a stand-alone TPMS receiver that reports to the BCM as well. Honda keeps a separate code 41 for abnormal signal reception. GM bulletin PIC5650M lists sensor codes C0750 to C0765 and C0775 among the effects of radio interference from toll passes, other key fobs, LED lamps or phone chargers. A circuit fault of the receiver itself, such as lost supply, ground or data line, silences all four wheels at once rather than a single sensor.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number9 / 10

Possible causes

  • Lost supply voltage or ground at the receiver, e.g. corroded connector high
  • Open or shorted data line between receiver and body control module medium
  • Radio interference from aftermarket devices (GM PIC5650M) medium
  • Receiver module or its antenna defective low

Symptoms

  • TPMS malfunction indication with no pressure shown for any wheel
  • Poor remote key range where the receiver is shared with the door locks

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0910

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication