OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0901

TPMS Sensor 1 Position Performance

Nothing public ties C0901 to a carmaker: no public code list, NHTSA bulletin or service index contains it. Its title concerns the automatic assignment of wheel transmitter 1 to a corner of the car. Without that link the system knows a pressure value but not which tire it belongs to. Saab's 9-5 of 2011 learns the side from the sensor's turning direction and the axle from signal strength, which takes 3 to 9 minutes of driving. A Schrader patent instead compares the phase angle each sensor reports with ABS tooth counts and picks the best matching wheel. Land Rover's TPM module sets C1D18-55 while locations are still unknown and clears it after 10 minutes above 20 km/h. A performance fault means the learning did not finish or gave a doubtful result.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number9 / 01

Possible causes

  • Learning drive too short or too slow after wheel change or sensor replacement high
  • Wheel speed data from the ABS module missing or implausible, so phase comparison fails medium
  • Transmitters of a spare wheel or a nearby vehicle disturbing the assignment low

Symptoms

  • TPMS warning lamp lit or flashing although tire pressures are correct
  • Pressures shown at the wrong wheel position or no position display at all

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0901

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication